expand search
2 male students sitting at a long table in front of imacs, smiling at the camera

Information Technology

Information Technology

Technology Guide for Seminar Room with Fixed LCD Display (MPC-M10)

Applies to rooms: SC208, TN105, TN106, TN107, TN109, TN110, TN114, TN124

The technology in these small seminar rooms supports local presentations. In-room equipment includes a 80 inch LCD display, audio visual control panel, networked computer, laptop input cable (HDMI) and campus WiFi.

Accessibility: If you require assistance with any of the equipment in the room please contact the Information Technology Service Desk by phoning 705 748-1010 or emailing it@trentu.ca

Note: Lectern equipment and layout may vary in some rooms.

classroom front view

Audio Visual Components Shown Below:

  1. Audio Visual (AV) control panel
  2. Lectern computer (PC)
  3. Laptop adapter cable for HDMI connection
  4. Laptop power outlet
  5. Monitor
  6. Keyboard and mouse
  7. Telephone (Call ext.1010 option 4 for emergency Tech Support)

Classrrom technology lectern audio visual components

Presenting from the Lectern Computer (PC)

  1. Power on the lectern computer (2)
  2. Login with your Trent username and password and open your presentation
  3. When you are ready to share your content with the class, power on the room display by pressing POWER ON on the AV control panel (1)
  4. Press PC on the AV control panel (1) to select that input source
  5. Adjust audio volume using the dial on the AV control panel (1)

Presenting from a Laptop

  1. Plug your laptop's power cord in to the lectern's power outlet (4) if desired
  2. Connect the lectern's adapter cable (3) to the laptop’s HDMI port
  3. Start your laptop and open your presentation
  4. When you are ready to share your content with the class, power on the room display by pressing POWER ON on the AV control panel (1)
  5. Press LAPTOP on AV control panel (1) to select that input
  6. If needed, press Window key + P on your laptop to mirror your laptop's video on the room display
  7. Adjust audio volume using the dial on the AV control panel (1)

AV Control Panel

Audio visual control panel. Item one

When You Are Finished

  1. Log off the lectern PC or shutdown and disconnect your laptop if needed.
  2. Power off the room display by pressing POWER OFF on the AV control panel (1)

Eligibility

  • Students
  • Staff
  • Faculty
  • Professor Emeriti

Service category

  • Teaching & Learning Tools

Last updated

Thursday, August 25, 2016 - 10:42